Transfer from SNOM M9

Answer

Call Transfer (Blind)

  • While “Connected”, press Options to bring up “Options” menu
  • Select Transfer Call
  • Enter Transfer Destination and press “OK”
  • Handset performs transfer and goes back to Idle mode


Call Bridging (Attended Transfer)

  • While “Connected”, press Options to bring up “Options” menu
  • Select New Call
  • Enter New Call Number and press “OK”
  • When “Connected”, press Options to bring up “Options” menu
  • Select Bridge Calls
  • Handset performs transfer and goes back to Idle mode
  • Note: Call Bridging can also be performed with the "Hangup" key by enabling the setting Identity->Behavior->Transfer on Onhook


 

  • 8 Users Found This Useful
Was this answer helpful?

Related Articles

How to activate Message Waiting Indicator

This article describes the procedure of setting up a voicemail message waiting warning for the...

How to use SIP Presence / Busy Line Feature (BLF)

  Overview The SIP Presence VoipNow Professional feature allows users to view the state of...

Telephone functions (* functions)

*21 Bellende telefoon opnemen op ander toestel*52 Test nummer / Echo test om vertraging op lijn...

Grandstream 17 minutes hangup bug

To prevent the Grandstream ATA's (or phones) to hangup after exactly 17:28 minutes change the...

Supported codecs and required settings

The supported codecs on our systems are: Audio (external connections): G.711a / G.711u /...